Ukiyo 130, 3inch prop, 11XX - 13XX motor size
2.5 mm unibody carbon frame
26 gr with fasteners.
Ideal for indoor FPV racing.
NOTE : Ukiyo130 v2 is now available, redesigned a bit to fit better with a 4in1 esc + the runcam swift micro format. Comes now with a 3d printed fpv camera mount to fit the Runcam micro swift
Warning: Last items in stock!
Availability date: 05/17/2017
|Prop size||3 inch|
Ukiyo130 v2 is now available, redesigned a bit to fit better with a 4in1 esc + the runcam swift micro format. Also come with a 3d printed fpv camera mount forthe Runcam micro swift.
Ukiyo 130 is made for indoor race.
This frame is the lighter frame of his category, 26gr (with fasteners) on the balance, His size is 135mm motor to motor.
This frame is really robust, a unibody main plate made by 2.5mm 3k carbon, chirurgical titanium screws, almost unbreakable.
To reduce the size and the weight we had to make a crucial choice, we've designed this frame for a specific FC size, like the smaller and most popular FC made by FURIOUS FPV, the PIKO BLX.
The FC mount pattern is not 30.5 x 30.5 like usual FC but 20x20.
So a classic FC like a SP F3 or naze32 wont fit on the frame.
(picture from helipal.com)
BUILD EXEMPLE :
- PIKO BLX micro FX (furious fpv)
- INNOVA VTX (furious fpv)
- Micro receiver (furious fpv)
An fpv camera like a Runcam Micro swift is recommended is you want to get the best image quality for this size. You can also use a mini cam or a small fatshark camera
The camera angle can reach around 60 degrees.
Runcam micro swift (recommanded) :
Mini cam no name :
Fatshark CMOS 700 TVL :
The bottom top plate is 1.5mm and is mounted by using three 25mm red knurled standoff with titanium screws on top of the 2.5mm bottom plate.
RECOMMENDED COMPONENTS :
- FPV CAMERA : runcam micro swift
- ESC : Spedix ES20 20A lite (DSHOT)
- MOTORS : 1306 3600kv
- FC : Furious FPV piko BLX
- VTX : Furious FPV Innova vtx
- RX : Furious fpv mini receiver
BUILD EXEMPLE :
1 x 2.5mm carbon main plate, 135mm motor to motor.
1 x 1.5mm carbon top plate.
3 x 25mm red kurneled aluminium spacers.
6 x screws.
1 x 3d printed fpv camera mount fopr runcam swift
*The camera Runcam swift and the electronic parts are not sell with the product. Just here to give you an idea once the product is build.
Spedix ES20 20A Lite - BLHeli_S ESC (DShot) Spedix ES20 20A Lite - BLHeli_S ESC (DShot)